eLTE2.2 eA660 Series CPE
User Guide
Figure 3-39 Install crystal connector
When making PoE network cables, follow the international standard EIA/TIA568A or EIA/TIA568A to
arrange the cables. Make sure that the two ends of each network cable use the same standard.
Step 3 Connect the PoE network cable.
1.
Issue 01 (2013-10-30)
Diassemble the PG-head screw cap and air-proof block on the PoE port, and pass the
network cable through them, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
3-40.
3 Installation
40