Huawei eLTE2.2 eA660 Series User Manual page 47

eLTE2.2 eA660 Series CPE
User Guide
No.
2
3
When checking the cable connections of the eA660, check the items listed in
order.
Table 3-7 Cable connection check of the eA660
No.
1
2
3
4
Step 2 Perform the power-on check, as shown in
Issue 01 (2013-10-30)
Check Item
for maintenance.
When the eA660 is mounted on a metal utility pole, the fixture must
be firmly installed, and the CPE must be attached.
When the eA660 is mounted on the wall, the installation hole on the
fixture must be aligned with the one on the expansion bolt. In addition,
the fixture must be tightly and firmly attached to the wall and must not
wobble when you shake it.
Check Item
No cable is short-circuited or inversely connected.
The bare wires and lugs of the connecting terminal must be tightly
wrapped with insulation tapes. Cooper wires must not be exposed.
Power cables or PGND cables with connectors are not used.
The connector of the PoE network cable must be appropriately
connected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-43.
3 Installation
Table 3-7 in
43