How To Assemble; How To Operate - Vax V-112P Instruction Manual

Hide thumbs Also See for V-112P:
Table of Contents

Advertisement

Vax V-112 Range User Guide.qxd:V-112 Range User Guide
www.vax.co.uk

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet before assembling or
removing the accessories.
1. Insert the flexible hose into the inlet on the main body
of the vacuum cleaner. Push in until it clicks into
position (Fig.3/1).
Fig.3/1
2. Push the telescopic extension tube on to the end of
the handle (Fig.3/2).
Fig.3/2
3. The telescopic extension tube can be lengthened or
shortened by pushing the button in and sliding the
tube apart or together as required (Fig.3/3).
Fig.3/3
4. Fit the combination floor head by pushing onto the
extension tube (Fig.3/4).
Fig.3/4
4
assembly / operation
All manuals and user guides at all-guides.com
2/10/08
13:07

4. How to Operate

Cord Release
Fully unwind the power cord. A yellow mark on the power
cord indicates the recommended cord length. Do not
exceed the cord length beyond the red mark.
On/Off Button
Insert the power plug into the electrical outlet. Ensure the
vacuum cleaner is switched off.
Press the on/off button located on the top of the vacuum
cleaner and press the button again to turn the vacuum
cleaner off.
Carpet Cleaning
For carpet and rug cleaning press the rocker switch on the
combination floor head to raise the brushes.
Hard floor cleaning
For hard floor cleaning, press the rocker switch on the
combination floor head to lower the brushes.
Cord Rewind
To rewind the power cord, press the cord rewind button,
located on the top of the vacuum cleaner, and guide the
power cord with one hand. This will prevent the cord from
whipping which could cause damage or injury.
Variable Power
Located between the cord rewind and the on/off button
there is a variable power dial. Rotate the dial clockwise to
increase the power and anti-clockwise to reduce.
Carry Handle
Use the carry handle located behind the cord rewind
button and on/off button to move the vacuum cleaner
from room to room.
Hose Storage
For convenience there is a slot located located on the rear
of the vacuum cleaner where the floor tool and hose can
be parked for carrying and storage.
Page 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-112V-112t

Table of Contents