WESTECH LandStar LS1024RP Instruction Manual page 18

4. ON/OFF mode
This mode is to turn ON and OFF the load by manual
• • • • Load Work Mode Setting
Timer1 Setting indicator
Timer2
Setting indicator
Battery type
Setting Indicator
Press the setting button once and setting indicators will be changed once
among timer 1, timer2 and battery type.
When timer 1 setting indicator is on, press the setting button for more than 5
seconds till the LED digital tube flashes. Then press the setting button till the
desired number appears according to the following table. The setting is
finished when the digital tube stop flashing.
Timer 2 setting is the same as timer 1 when the setting indicator is on timer2
Figure 4-3 Setting operation indicating
15
Load work mode LED digital tube
Setting button