Epson LX-300+ Product Information page 5

Safety standards UL 1950
CSA C22.2 No. 950
EMI FCC part 15 subpart B class B
CSA C108.8 class B
Safety standards EN 60950
EMI EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
Acoustic noise Approx. 49 dB (A) (ISO 7779 pattern)
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
f f When continuous paper is in the tear-off position;
otherwise the lights indicate the selected font.
When the tractor is installed in the push position, advances
continuous paper to the tear-off position.
Feeds continuous paper backward from the tear-off position
to the top-of-form position.
EN 60950
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 60801-2
IEC 60801-3
IEC 60801-4
5/00
Feeds paper line by line when pressed and released.
When held down, ejects a single sheet or advances
continuous paper to the next top-of-form position.
Loads or ejects a single sheet of paper.
When the tractor is installed in the push position, loads
continuous paper from the standby position or feeds
continuous paper backward to the standby position.
On when no paper is loaded in the selected paper source or
paper is not loaded correctly.
Flashes when paper has not been fully ejected or a paper jam
has occurred.
In Micro Adjust mode, selects the font indicated by the
lights.
Stops printing temporarily, and resumes printing when pressed
again. When pressed for 3 seconds, turns on Micro Adjust
mode.
On when the printer is paused.
Flashes when the printer is in the Micro Adjust mode or
when the print head has overheated.
When you hold down the
printer enters the Micro Adjust mode. In this mode, you can
D and
press the
top-of-form or tear-off position.
EPSON LX-300+
button for 3 seconds, the
U buttons to adjust the
EPSON LX-300+ 5
-