Epson LX-300+ Product Information page 15

To keep your printer operating at its best, you should clean it
thoroughly several times a year. Follow these steps:
1. Remove any paper loaded in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide. If a pull tractor or an optional cut-
sheet feeder is installed, remove it.
4. Use a soft brush to carefully brush away all dust and dirt
from the outer case and paper guide.
5. If the outer case or paper guide is still dirty, clean it with a
soft, clean cloth dampened with mild detergent dissolved in
water. Keep the printer cover in place and lower it until it
lies flat on top of the printer to prevent water from getting
inside the printer.
If you need to transport your printer, carefully repack it using
the original box and packing materials, as described below.
1. Remove any paper in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Attach the paper guide.
4. If a pull tractor is installed, remove it. If any options are
installed, remove them and pack them in their original
boxes.
5. Make sure that the print head is not hot. Then remove the
ribbon cartridge.
6. Make sure the tractor that came with your printer is
installed in the push position.
7. Repack the printer, ribbon cartridge, and paper guide in the
original packing materials and place them in the printer's
original box.
4012023 EPSON LX-300+ User's Guide
4012328 EPSON LX-300+ Read All About It
(Transition Guide)
TM-LX300+ EPSON LX-300+ Service Manual
PL-LX300+ EPSON LX-300+ Parts Price List
5/00
EPSON LX-300+
EPSON LX-300+ 15
-