Epson LX-300+ Product Information page 3

Use recycled paper, envelopes, and single-sheet multipart forms
only under normal temperature and humidity conditions, as
follows:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 30 to 60% RH
Do not load paper that has been folded or is damaged,
wrinkled, or curled.
Width Paper guide
3.9 to 10.1 inches (100 to 257)
Cut-sheet feeder
7.2 to 8.5 inches (182 to 216 mm)
Length Paper guide
3.9 to 10.1 inches (100 to 257 mm)
Cut-sheet feeder
10.1 to 14 inches (257 to 356 mm)
Thickness 0.0028 to 0.0047 inch (0.07 to 0.12 mm)
Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to
0.14 mm)
Weight 14 to 24 lb (52 to 90 g/m
Cut sheet feeder: 18 to 24 lb (64 to 90 g/m
Width 3.9 to 10.1 inches (100 to 257 mm)
Length 3.9 to 14.3 inches (100 to 364 mm)
Copies 1 original up to 4 copies
Thickness 0.0047 to 0.015 inch (0.12 to 0.39 mm)
Weight 12 to 15 lb (40 to 58 g/m
Binding Line glue at the top of form
Size No. 6: 6.5
No. 10: 9.5
Thickness 0.0063 to 0.0205 inch (0.16 to 0.52 mm)
Weight 12 to 24 lb (45 to 90 g/m
2 )
2 )
3.6 inches (165 92 mm)
4.1 inches (241 105 mm)
2 )
Width 4 to 10 inches (101.6 to 254 mm)
Length 4 to 22 inches (101.6 to 558.8 mm)
Copies 1 original up to 4 copies
Thickness Printable area
Perforated edges
Weight (not multipart)
Weight (1 multipart sheet) 12 to 15 lb (40 to 58 g/m
Binding Spot glued or crimp bound on both sides (bottom
or rear entry)
The continuous multipart forms should be securely joined
together along the left and right edges by crimping.
Crimping should be pressed in from the original sheet side
and go completely through all copy sheets.
The ratio of the cut/uncut length at the perforation should
be between 3:1 and 5:1.
The perforation between pages should not extend all the
way to the edges of the paper.
At the perforation between pages, the horizontal and
vertical perforation cuts should not cross.
2 )
The thickness of the perforation part when extended should
be 1 mm or less.
Label size (minimum)
Backing sheet width
Backing sheet length
Backing sheet thickness
Total thickness
Label weight
Width 8.5
Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Weight 14 to 22 lb (52 to 82 g/m
5/00
EPSON LX-300+
0.0025 to 0.015 inch (0.065 to 0.39 mm)
up to 0.035 inch (0.9 mm)
14 to 22 lb (52 to 82 g/m
0.938 2.5 inches (23.8 63.5 mm)
0.1 inch (2.5 mm) corner radius
4 to 10 inches (101.6 to 254 mm)
4 to 22 inches (101.6 to 558.8 mm)
0.0028 to 0.0035 inch
(0.07 to 0.09 mm)
0.0063 to 0.0075 inch
(0.16 to 0.19 mm)
17 lb (64 g/m 2 )
0.12 inch (216 3 mm)
2 )
EPSON LX-300+
2 )
2 )
3
-