Using Memory Function; Viewing The Readings Stored In Memory - Omron BP7455CAN Instruction Manual

5. Using Memory Function

Your monitor automatically stores up to 100 readings each for 2
users, for a total of 200 readings.
Note
•This monitor can store readings of up to 2 users. Refer to sub-
section 2.8 to switch user. Make sure which user ID stores your own
readings.
5.1

Viewing the Readings Stored in Memory

1. Select your user ID.
2. Press the
If the past reading was
taken in TruRead mode,
the " " symbol appears
and the reading shown
on the left is the average
of 3 measurements.
After a memory number appears, the latest reading will
appear with a past reading. A past reading will appear in the
comparison display on the left.
button.
Memory number
1 sec.
Past reading
If the latest reading was
taken in TruRead mode,
the "
appears and the reading
shown on the right is the
average of 3 measurements.
Alternating
date/time
display
Latest reading
" symbol
EN
33