Table of Contents
Advertisement
Using the Re dial Command
1. Press
/
. The system
responds with a tone. After the
tone say Hands Free . The
system responds with Ready
followed by a tone.
2. After the tone, say Re dial . The
system responds Re dial using
<phone name> and dials the
last number called from the
connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press
to answer the call.
Press
/
to ignore a call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier.
Press
to answer an
incoming call when another call
is active. The original call is
placed on hold.
Press
again to return to the
original call.
To ignore the incoming call, no
action is required.
Press
/
to disconnect the
current call and switch to the call
on hold.
Infotainment System
Three Way Calling
Three Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier.
1. While on a call press
system responds with Ready
followed by a tone.
2. Say Three way call .
The system responds with
Three way call, please say
dial or call .
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
to link all the callers
together.
Ending a Call
Press
/
to end a call.
6-59
. The
Advertisement
Table of Contents
