Table of Contents
Advertisement
To access contacts stored in the cell
phone:
1. Press
/
. The system
responds with a tone. After the
tone say Hands Free . The
system responds Ready
followed by a tone.
2. Say Bluetooth . The system
responds Bluetooth ready
followed by a tone.
3. Say Voice . The system
responds OK, accessing
<phone name> .
The cell phone's normal
prompt messages will go
through its cycle according
to the phone's operating
instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The in vehicle Bluetooth system can
send numbers and the numbers
stored as name tags during a call.
Use this feature when calling a
menu driven phone system. Account
numbers can also be stored for use.
Sending a Number During a Call
1. Press
. The system
responds Ready followed by
a tone.
2. Say Dial . The system responds
Say a number to send tones
followed by a tone.
Infotainment System
3. Say the number to send.
If the system recognizes
the number it responds
OK, Sending Number and
the dial tones are sent and
the call continues.
If the system does not
recognize the number it
responds Dial Number,
please say yes or no?
followed by a tone. If the
number is correct, say
Yes . The system responds
OK, Sending Number and
the dial tones are sent and
the call continues.
6-61
Advertisement
Table of Contents
