Receiving A Call; Call Waiting - Cadillac 2010 Escalade Owner's Manual

Hide thumbs Also See for 2010 Escalade:
Table of Contents

Advertisement

3. Say the name tag of the person to call.
If the system clearly recognizes the name tag it
responds with OK, calling, <name tag> and
dials the number.
If the system is unsure it recognizes the right
name tag, it confirms the name tag followed by
a tone. If the name tag is correct, say Yes .
The system responds with OK, calling, <name
tag> and dials the number. If the name tag is
not correct, say No . The system will ask for
the name tag to be re entered.
Once connected, the person called will be heard
through the audio speakers.
Using the Re dial Command
1. Press and hold
responds with Ready followed by a tone.
2. After the tone, say Re dial . The system responds
with Re dial using <phone name> and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
for two seconds. The system

Receiving a Call

When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
Press
and begin speaking to answer the call.
Press
to ignore a call.

Call Waiting

Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
Press
to answer an incoming call when
another call is active. The original call is placed
on hold.
Press
again to return to the original call.
To ignore the incoming call, continue with the
original call with no action.
Press
to disconnect the current call and
switch to the call on hold.
4-75

Advertisement

Table of Contents
loading

This manual is also suitable for:

Escalade esvEscalade2010 escalade esv

Table of Contents