Table of Contents
Advertisement
3. Say the complete phone number
to be stored at once with no
pauses.
If the system recognizes
the number the response is
OK, Storing .
If the system does not
recognize the phone
number, the response is
Store <Phone number> .
Please say yes or no .
If the number is correct, say
Yes . If the number is not
correct, say No . The
system will ask for the
number again.
4. After the system stores the
phone number, it responds
Please say the name tag
followed by a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds About to store <name
tag>. Does that sound OK? .
If the name tag does not
sound correct, say No and
repeat Step 5.
If the name tag sounds
correct, say Yes and the
name tag is stored. After
the number is stored the
system returns to the
main menu.
Using the Digit Store Command
The digit store command allows a
phone number to be stored by
entering the digits individually.
1. Press
/
. The system
responds with a tone. After the
tone say Hands Free . The
system responds Ready
followed by a tone.
Infotainment System
2. Say Digit Store . The system
responds with Please say the
first digit to store followed by
a tone.
3. Say the first digit to be stored.
The system will repeat back the
digit it heard followed by a tone.
Continue entering digits until the
number to be stored is complete.
If an unwanted number is
recognized by the system,
say Clear at any time to
clear the last number.
To hear all of the numbers
recognized by the system,
say Verify at any time.
4. After the complete number has
been entered, say Store . The
system responds Please say
the name tag followed by
a tone.
6-55
Advertisement
Table of Contents
