Table of Contents
Advertisement
6-60
Infotainment System
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To Mute a call
1. Press
. The system
responds Ready followed by
a tone.
2. Say Mute Call . The system
responds Call muted .
To Cancel Mute
1. Press
. The system
responds Ready followed by
a tone.
2. After the tone, say Mute Call .
The system responds
Resuming call .
Transferring a Call
Audio can be transferred between
the in vehicle Bluetooth system and
the cell phone.
To Transfer Audio to the Cell
Phone
During a call with the audio in the
vehicle:
1. Press
. The system
responds Ready followed by
a tone.
2. Say Transfer Call. The system
responds Transferring call and
the audio transfers to the cell
phone.
To Transfer Audio to the In-Vehicle
Bluetooth System
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred. The connection
process can take up to two minutes
after the key is turned to ON/RUN
or ACC/ACCESSORY.
Press
during a call with the
audio on the cell phone. If the audio
does not transfer to the vehicle, use
the audio transfer feature on the cell
phone. See the cell phone
manufacturer's guide for more
information.
Voice Pass-Thru
Voice Pass Thru allows access to
the voice recognition commands on
the cell phone. See the cell phone
manufacturers user guide to see if
the cell phone supports this feature.
Advertisement
Table of Contents
