Port Panel Overview; Film Installation - Kodak REELZ User Manual

8. PORT PANEL OVERVIEW

1. SD™ card slot
2. MICRO USB slot
3. DC 12 V port

9. FILM INSTALLATION

1. Unfold the two (2) reel shafts until they click into place.
2. Carefully pull out the end of the film on your 8mm or Super 8 reel (not included). Then, fold
up the end of the film nice and tight and slowly insert the end of the film in the slot on the
empty reel (included). This process will help you connect your film to the empty reel.
3. Spin your empty reel around a few times to make sure your film is now securely connected to
the empty reel.
4. Insert your reel onto the left reel shaft and place the empty reel onto the right reel shaft.
(If the reel you're using has a big mounting hole, use the provided red color reel adapter. If
adapters are needed, always place red color adapter on the left reel shaft; gray color adapter
on the right reel shaft.)
5. Take the film between the two (2) reels and carefully thread it through the scanner. Use the
white, solid line on the film scanner to follow how to thread the film on the film spools.
6. Push the film lid tab to the left to lift the film lid and gently wipe down the film area with the
cleaning cloth (included) before placing the film.
7
1 3
2