Kodak REELZ User Manual page 11

Recording Function
1. Choose the "Record" option in the Video Preview Mode. Once selected, the record icon will
appear white.
2. Press the OK/Enter button to enter the prompt interface for switching between Super
8 and 8mm.
3. Use the film type switch in front of the film scanner to select film type. Then, press the
OK/Enter button to record.
NOTE: The 'Set film type' screen will only appear once per use of the device.
During this process, the device will capture each image of the film and combine it into a digital
video. The area in the film slot will light up the film from the bottom as the film is scanned
with the camera above it. The film is scanned in the scanning area of the film slot frame by
frame. The scanned video is then transferred into your inserted SD™ card.
NOTES: If the film has damages or gets stuck, lift the film lid and push the damaged area past
the lit-up scanning area. Then, make sure the film is firmly in place and reclose the lid.
You can press the OK/Enter button while the recording is in process to stop it. This will
also automatically save the MP4 files.
Every time you stop and start a recording a new video file will be created by default.
Frame Adjust Function
1. Press the Up or Down button to choose the "Frame Adjust" option in the Video Preview Mode.
Then, press the OK/Enter button to enter the adjustment interface.
2. After entering the adjustment interface, press the directional arrow buttons to
adjust the margin and press the Plus or Minus button to zoom in or out.
3. Once the desired settings are reached, press the OK/Enter to confirm.
11