Kodak REELZ User Manual page 14

NOTE: Use the dotted line to thread the negative for the rewind process.
The film should be lifted out of the film slot so the gray pin doesn't slow down the film.
Fast Forward Function
1. Press the Up or Down button to choose the "Fast Forward" option in the Menu.
2. Press the OK/Enter button to enter the option.
3. After entering, press the OK/Enter button according to the prompts.
NOTE: Fast forward and rewind are both used to wind up your reel. The only difference is that in
order to rewind, you must swap the placement of the reels. For rewinding, reels must
be swapped so the film can still be scanned correctly. Fast forward is used to decide
where you will start recording. Use fast forward to speed through certain parts of your film.
Use the dotted line to thread the negative for the fast forward process.
The film should be lifted out of the film slot so the gray pin doesn't slow down the film.
MAIN MENU: SETTINGS
Select "Settings" in the main menu interface and press the OK/Enter button to enter the settings
interface. In the settings interface, you should see the options: Language, Filmtype, USB Upload,
Erase SD card, Factory Reset, and About.
14