Brother 1034D Serger Quick Reference Manual page 2

Brother 1034D Serger Quick Reference Guide
Remember, some stitches use all 4 spools, but some use
only three spools. Refer to the Serger Techniques
booklet for detailed information on stitches.
1. Pull the grey thread tree up to its highest position.
2. Place spools of thread on the spool pins, and place
thread spool caps on top of spools. If you are using
very fine or silky thread, cover your spools of thread
with the nets in the supply compartment.
3. Turn thread tension knobs on the front of the machine
to "0".
4. Open the front cover by pulling right then down.