Electric two frame stainless steel honey extractor (8 pages)
Summary of Contents for Vivo BEE HV01
Page 1
Thank you for purchasing our VIVO product! Scan the QR code with your mobile device or follow the link to helpful videos related to this product. Langstroth Beehive Assembly Manual https://vivo-us.com/products/bee-hv01 Need Help? Before you call for service, here are a few things you can do to help us serve you better.
Page 2
Assembling Instructions Tools Required: Drill or Screwdriver w/ Wood Glue ● ● Phillips Head Block ● Hive Boxes Hammer ● Package Contents Step 1: Use a hammer and a block to fit 2 side panels and 2 end panels (B1 & B2) together to make a box.
Page 3
Hive Frames (cont.) Step 3: Repeat steps 1 and 2 for each additional box. Step 3: Put a small dab of wood glue on each ends of the end panel. Attach the bottom bar Hive Frames (F5) into the final notches of the frame. Push down until the fit is snug.
Page 4
5) Inner Cover 6) Outer Cover/Telescoping Cover For more VIVO products, check out our website at SUGGESTION: Coat the exterior wood with chemical-free Tung oil or prime and paint the exterior surfaces. Leave the interior - except for the bottom board –...
Need help?
Do you have a question about the BEE HV01 and is the answer not in the manual?
Questions and answers