Table of Contents
Advertisement
Quick Links
20 Frame Langstroth Beehive
Instruction Manual
SKU: BEE-HV01
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/bee-hv01
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo BEE-HV01
Summary of Contents for Vivo BEE-HV01
- Page 1 20 Frame Langstroth Beehive Instruction Manual SKU: BEE-HV01 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/bee-hv01 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING: IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL SAFETY REQUIREMENTS KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician.
- Page 3 PACKAGE CONTENTS (Continued) STACK HIVE S1 (x2) S2 (x20) S3 (x1) Hive Box (Assembled Frame with Foundation Inner Cover by you) (Assembled by you) S4 (x1) S5 (x1) S6 (x1) Bottom Board Outer Cover/Telescoping Queen Excluder Cover ASSEMBLY STEPS: Hive Boxes STEP 1 Option A: Assembling Without Nails After gathering the tools and package contents, dry fit the 2 side panels and 2...
- Page 4 STEP 2 OPTION 2: Assembling With Nails The super can be nailed together but is not re- quired. Pre-drill holes in the center of each “leg” of the pre-cut joint to prevent wood splitting. Then hammer in one nail (B3) at a time. Check to make sure box is still aligned every so often.
- Page 5 STEP 2 Insert plastic foundation (F4) into the groove of the top bar. STEP 3 Put a small dab of wood glue on each ends of the end panel. Attach the bottom bar (F5) into the final notches of the frame. Push down until the fit is snug. Bottom Bar View from Bottom STEP 4...
- Page 6 STEP 5 Place one gray nail (F3) on one end of the bottom bar and hammer into the end panel. Hammer another nail on the opposite end of the bottom bar in the same manner. This will ensure that the frame will not pull apart until it is glued in by the bees with propolis.
- Page 7 STEP 2 Stack the hive parts in this order: Bottom Board (side with larger gap size should be facing up to leave room for an entrance reducer, if used) Deep Box w/ Frames Inside Queen Excluder Medium Box w/ the Frames Inside Inner Cover Outer Cover/Telescoping Cover Outer Cover/...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the BEE-HV01 and is the answer not in the manual?
Questions and answers