Two frame stainless steel honey extractor (8 pages)
Summary of Contents for Vivo BEE-V002E
Page 1
Electric Two Frame Stainless Steel Honey Extractor Instruction Manual SKU: BEE-V002E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/bee-v002e help@vivo-us.com www.vivo-us.com 1-800-371-5654...
Page 2
WARNING: IMPORTANT SAFETY INFORMATION READ AND FOLLOW ALL SAFETY REQUIREMENTS KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Page 3
PACKAGE CONTENTS 1 (x1) Honey Extractor 2 (x1) Honey Gate with Lid 3 (x1) Hex Nut (on Honey Gate) 4 (x1) O Ring (Pre-installed on Honey Gate) 5 (x3) 6 (x6) Leg Bolt 7 (x6) Washer 8 (x2) Lid (with a Safety Switch) 9 (x12) M4 Bolt 10 (x12)
Page 4
STEP 2 To install honey gate, remove large hex nut from gate piece. Insert gate through the front side hole and secure backside with hex nut (tighten enough to seal O ring). STEP 3 Close both lids to engage safety switches.
Page 5
STEP 4 Extractor is ready to operate. (see Operating Instructions) STEP 5 If needed, adjust coupling using the attached bolts. STEP 6 (Optional) Bolt feet down to floor or surface for added stability (hardware included).
Page 6
OPERATING INSTRUCTIONS STEP 1 With the control dial set to “0” and power switch set to off (O), plug the power cord into a standard AC wall outlet. STEP 2 Place honey frames in extractor basket. Load two sides to keep extractor balanced as this will reduce any possible shaking.
Page 7
CARE & MAINTENANCE QUICK CLEANING Option 1: Rinse extractor out with cold water from a hose. If available, a pressure washer is very effective. Empty excess water to prevent possible surface rust. Option 2: Place open extractor next to hive. Bees will clean it out and use the materials.
Page 8
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the BEE-V002E and is the answer not in the manual?
Questions and answers