New Comfort BL3000 Instruction Manual page 9

1. Press button 3 + 5 at the same time, LCD show 0:00
clock
2. Operate No 4 button within 2 seconds to adjust timer,
timer increase 0.5Hr each time press this button
Timer off
3. Timing function finish, enter autoamatic off mode, back
to previous working status.
Note: press any button to off the timer function when
timer off mode start.
LCD Display
No Name
Fan working Press FAN to indicate fan working status, to display 1 to 5
1
status fan speed
HIGH purifying When the coverage area is more than 2400 sq.ft, the LCD
2
reminder display show HIGH
It show 1000- 3000 sq. ft during working, the coverage
Coverage area area change 200 sq ft each time press FAN and PURIFY
button
3 Timing Timing function is turned on, the countdown clock, purified
reminder area and timer will be Interactive Display
Standby mode display 0000, the LCD backlight off at the
Standby
same time.
LCD display"AREA MUST BE UNOCCOPED" when ozone
Ozone function is on. Note: Ozone has obvious effefct on killing germs and
5
reminder removing odors, however, excess ozone can have health
effects , therefore, it can be used in unoccuped space only
Display NORMAL（1~5） ，HIGH（1~3） ，AWAY（1~3
6 Mode according to different working condition base on purified
area .
9
LCD display