Changing Default Settings - Epson FX-880 Important Information Manual

Changing Default Settings

The FX-880T comes configured with certain default settings. You
can change these settings when needed through the Default
Setting Mode, as described in Chapter 5 of your FX-880/FX-1180
User's Guide.
The instructions below explain how to change the character
pitch, bottom margin, and software emulation. (The character
pitch and bottom margin settings are not covered in the User's
Guide.)
1. To enter default setting mode, make sure the printer is off.
Then hold down the Tear Off/Bin button while you press the
Operate button to turn on the printer.
The printer prints 2 pages of instructions, the first showing
the menu of options, and the second showing the LED (light)
status for each option setting.
2. Looking at the first page of instructions, find the option you
want to change and press the Tear Off/Bin button until the
Font and Tear Off/Bin lights indicate the option you want:
Menu
Software (emulation)
Pitch
Bottom margin
o = off, n = on, f = flashing
6
Font lights
o n
n n
n f
Tear Off lights
f
f
o