Related Manuals for Euromatic DF40RC-CH
Summary of Contents for Euromatic DF40RC-CH
- Page 1 40cm Desk Fan with Remote Control INSTRUCTION MANUAL Model Number DF40RC-CH AFTER SALES SUPPORT (AU) 1300 886 649 (NZ) 0800 836 761...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Product Overview Getting Started Instructions Other Useful Information After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org... -
Page 3: Important Safety Instructions
Important Safety Instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. - Page 4 Important Safety Instructions (Cont.) • RCD: Unless your home is already fitted with a residual current device (safety switch), we recommend installing an RCD with a rated residual operating current not exceeding 30mA to provide additional safety protection when using electrical appliances.
-
Page 5: Product Overview
Product Overview Parts list Safety guards (front and rear grilles) Fan blade Lock system of the clamping ring Stand post Control panel and LED display Base Base locking lever (underneath) Remote control Clamping ring NOTE: Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased. -
Page 6: Getting Started
Getting Started Unpacking • Unpack: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. - Page 7 Getting Started (Cont.) Base assembly 1. Set the base on a table or workbench. 2. Unscrew the metal washer and base locking lever and remove it from the bottom of the stand post. 3. Insert the stand post into the base, put the metal washer onto the black weight.
-
Page 8: Instructions
Instructions Control panel or remote control operation For your convenience, the fan can be operated from the control panel at the front of the unit, or with the remote control. The buttons on the control panel operate the same functions as the remote control, except for setting the timer from the control panel, which is slightly different and explained in the instructions below. -
Page 9: Other Useful Information
Other Useful Information WARNING! • Before cleaning, maintenance or moving the fan, and before removing a front or rear guard, switch off the fan and unplug it from the wall outlet. • Do not immerse the fan in water or other liquids. Do not spray it with liquids. - Page 10 Other Useful Information (Cont.) Battery replacement The remote control is powered by a 3V lithium button cell (CR2025). When the battery needs replacing, please insert a new one of the same type and size: • Remove the screw at the back of the device using a Phillips screwdriver. •...
- Page 11 Other Useful Information (Cont.) Technical specifications Power 220-240V~, 50Hz, 55W Timer 18 hour timer Fan speeds 3 (Low - Medium - High) Remote control Powered by a CR2025 3V lithium button cell (included) Dimensions (mm) 700mm (H) x 415mm (W) x 450mm (L) Weight approx.
- Page 12 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 for advice.
Need help?
Do you have a question about the DF40RC-CH and is the answer not in the manual?
Questions and answers