Advertisement
T4360G, T6360D,E Line Voltage Thermostat
Sub Base Installation
The thermostat can be mounted horizontally or vertically
on the wall or a wall plate/box. Refer to Figs 2 and 3.
1.
Position and level the sub base (for appearance
only). The thermostat will function properly even
when not level.
2.
Use a pencil to mark the mounting holes.
3.
Remove the sub base from the wall and drill two
holes in the wall as marked. Gently tap anchors into
the drilled holes until flush with the wall.
Fig 2: Vertical Installation diagram
Fig 3: Horizontal Installation diagram
AU4360I-01
All manuals and user guides at all-guides.com
2
4.
Position the sub base over the holes, pulling wires
through the wiring opening.
5.
Loosely insert the mounting screws into the holes.
6.
Tighten mounting screws.
Advertisement
