Epson EPL-N2750 Setup Manual page 76

5. Fan a stack of paper and tap it on a flat surface to even the
edges. Insert the paper with the printable side facing up,
aligning the corners of the paper with the metal retaining clips
inside the cassette.
Note:
Be sure not to load paper higher than the maximum paper mark.
If your printouts are curled or do not stack properly when using
plain paper, try turning the stack over and reloading it.
Make sure to adjust the paper guides to match the paper size
you load; otherwise, the printer will not print properly.
6. Set the paper size with the paper-size dial.
70
Plugging in the Printer
printable side up