Connect Camera To App - Zumimall GX1C Quick Start Manual

5.2 Connect Camera to App

5:48
Devices
Tap + to add a new device.
Devices Messages Me
Tap '+' to Add Device
5:50
<
Wi-Fi Setup
Select your Wi-Fi network
(Please select a 2.4G network, this device will
not work with 5G Wi-Fi networks)
Junan Change WiFi
cam2019@
Hide Password
Next
Input Wi-Fi Password
5:48
Select Device
Get Smarter about your Smart Security
Camera Doorbell
Battery Camera
Select 'Battery Camera'
5:50
<
Operation instructions
15~25cm
— — — — — — — — — — — — — — — —
5~5 in
Please remove all film from the lens.Tap
Next to show a QR code, and let your
device scan the code. Keep your phone 5-8
inches from the lens.
Next
Prepare the Scanning
5:49
<
Add Battery Camera
4
Hold the device power button to start the
device.
Press the [battery camera] button to wake the
device if it is asleep.
Please stay near to your router foe the best
signal.
Next
Tap 'Next'
5:50
<
Scan QR Code
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Nctificati...ne heard.
Scan QR Code When Indicator
Flashing Slowly in Red
5
gx1c@zumimall.com
5:49
<
Add Battery Camera
Please reset the device.
Hole the RESET button on your device for 4-5
seconds(please refer to the usea manual for
more on this).
Wait for a flashing RED indicator light.
Tap Next
Next
Reset it and Tap 'Next'
5:50
<
Connect Network
connecting...
12%
Please place the camera & phone
close to your router for the best
signal.
Device Found!
Connecting the device to the network...
Registering device...
Finished Installation
When Reaches 100%