System Operation; General; Connections At The Back Of The Device; Operating With A Mouse - Abus HDCC90020 User Manual

System operation

General

The device can be controlled using the following:

Control panel on the front of the device

IR remote control

a USB mouse

Connections at the back of the device

Note
Take a look at the overview on page 3.
No Name
Function
1 AUDIO IN

4 Audio cinch inputs
2 VIDEO OUT

Spot output
3 VGA:

VGA monitor connection (9-pin), video output
signal
4 LAN:

Ethernet LAN connection
5 USB:

USB connections for operating with a mouse
and data export
6 HDMI

HDMI monitor connection
7 AUDIO OUT:

BNC audio output (synchronised with the
video output)
8 POWER SUPPLY

100–240 V AC connection for power supply
9 ALARM IN/OUT

16 alarm inputs/4 alarm outputs
10 RS-485

Connection for pan tilt zoom (PTZ) cameras
11 JOG DIAL

For selecting the operating mode
12 eSATA

Connection for an external hard drive
13 VIDEO IN:

BNC input for HD-TVI and analogue
cameras
14 LINE IN

Audio input for 2-way communication

Operating with a mouse

Note
The further descriptions contained in this user
guide involve using a mouse.
The device is suitable for use with a USB mouse.
Connect the mouse to the USB port.
Button Function
Left Single click:

Selection in the menu, activation of an input
field or a tab, display of the Quick Set
menu.
Double click:

Switch between the screen display of single
and multiple images in the live view and
during playback.
Click and drag:

Set up private masks or zones.
Right Single click:

Open the pop-up menu.

Return to the previous menu.
Scroll In live view:
wheel 
Display previous/next camera.

Control panel on the device

Note
Refer to the overview on page 1.
Name
Function
Recorder buttons:
MENU:
 Call up main menu
 Switch key tone on/off (press for five sec.)
REC:
 Call up menu for manual recording
PLAY:
 Open playback menu
ZOOM+:
 Enlarge image section in PTZ working mode
ZOOM Out:
 Reduce image section in PTZ working mode
System operation
4