E) Dab Aerial - Renkforce RF-RUDAB1805 Operating Instructions Manual

e) DAB aerial

For adhesive installation, a minimum temperature of approx. 15°C is required. Clean the adhesive areas
with a suitable cleaner before installation (e.g. cleaning alcohol).
Do not glue the aerials in the area of metal-vaporised windshield parts or close to heating wires.
Do not attach the aerial in the field of view of the driver. It must not impair the driver's view.
When selecting the mounting site, observe the length of the aerial cable. It must reach to the installation
site of the car radio.
The DAB aerial and connection cable never must be installed or placed in the trigger area of an airbag.
• Specify the installation position for the DAB aerial. The aerial should be installed in the upper area of the front
window. In order to ensure proper reception, keep a distance of about 5 cm between the two reception wires and
any metal parts, such as the car body, window frame, etc.
• Remove the protective films and glue in the aerial so that the cable exit points at the canopy.
• After gluing in, the aerial should not be subjected to any mechanical stress for 24 hours.
• Place the connection line to the radio installation slot.
39