Epson Apex 80 User Manual page 25

Figure 1-18.
Apex80 ready for automatic paper loading
6. Press and release the
DRAFT/LINE FEED
top of the page.
ON/OFF LINE
7. Push the
data.
Note
Make sure the front lid is in place whenever you print. (Always snap
the lid shut when replacing the lid.) The front lid doubles as a paper
bail, holding the paper against the platen,
8. If the paper is crooked and needs to be reloaded, pull the paper
release lever forward, pull out the paper, push the lever back, turn
the printer off, and reload by beginning again at step 1 in the
Automatic paper loading section above. If the paper just requires
minor adjustment, then pull the paper release lever forward, open
the front lid, adjust the paper, and push the lever back. Then close
the front lid.
1-18
AUTO LOAD
button (the same button as the
button). The paper is automatically loaded to the
button so that the printer is ready to accept
Setting Up