Installing The Paper Feed Knob; Installing The Ribbon - Epson Apex 80 User Manual

Installing the Paper Feed Knob

Now that you have decided where to locate your Apex80 printer, the
first step in setting it up is installing the paper feed knob. Follow these
steps:
1. Locate the paper feed knob, which is packed into an indentation in
the white foam material.
2. Insert the knob into the hole on the right side of the printer, as
shown in Figure 1-2. Gently rotate the knob until it fits over the
shaft.
Figure I-2.
feed knob installation
Paper
3. Push the knob in until it is flush with the printer case.

Installing the Ribbon

The Apex80 printer uses a continuous-loop, inked fabric ribbon. It is
enclosed in a cartridge that makes ribbon installation and replacement
a clean and easy job.
Setting Up
1-3