ViewSonic LS700-4K User Manual page 57

Description of menu
Functions
Language
Audio settings
Projector Projection
Keystone
Pattern
Remote Control Code Please refer to the
Baud rate
Network Settings
Power On Source
Auto Power On
Set language of the display screen (OSD) menu.
Please refer to "Activate the projector"
Mute
Audio Volume
Power On/Off Ring Tone
The will be a tone prompt when the projector is
powered on or off.
Please refer to "Choosing a location"
Please refer to "Perform keystone correction"
details.
The projector can display a test pattern. It can help you
adjust the image size and focal length to ensure that
there is no distortion of the projected images.
"IR control table"
Please refer to the "RS232 command table"
details.
Please refer to the "Network Settings"
Please refer to the "Switching input signal"
details.
Signal
Set whether or not the projector will automatically adjust
when it is in standby mode and detects VGA or HDMI
signals of 5V power supply.
CEC
Please refer to "Using the CEC function"
Direct Power On
Once the power is supplied via power cord, the
projector can turn on automatically if "Enable" has
been selected.
50
Description
for the details.
for the details.
for the details.
for the details.
for the details.
for the
for the
for the