Download Print this page

Model 315W Wine Storage Care - Sub-Zero 315W Use & Care Manual

Advertisement

Model 315W Wine Storage Care

Interior Lighting
LIGHT BULB REPLACEMENT
Interior lighting for model 315W is located in the top of the
cabinet. The light bulb has an extended life and it should
be some time before it needs to be replaced.
Replacement bulbs are available from Sub-Zero factory
certified service. For the name of the factory certified
service nearest you, check the contact & support section
of our website, subzero.com or call Sub-Zero customer
care at 800-222-7820.
To replace the light bulb, shut off power to the unit.
Remove the top wine storage shelf. Pull the plug from the
socket in the top of the unit as shown in the illustration
below. Remove the bulb from its holder and install the new
bulb.
Shut off power to the unit before replacing the light
bulb. Wear protective gloves when handling the bulb.
LIGHT BULB
PLUG
Light bulb replacement.
Cleaning
STAINLESS STEEL EXTERIOR
To clean the stainless steel exterior of the model 315W/S,
use a soft, nonabrasive stainless steel cleaner like Signa-
ture Polish and apply with a soft lint-free cloth.
Signature polish is available from Signature Limited
Laboratory, P. O. Box 13436, Dayton, Ohio 45413, or call
877-376-5474.
To bring out the natural luster of the stainless steel, lightly
wipe the surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. All work should
follow the grain direction of the finish. Better results are
obtained by keeping the cloth in continuous contact with
the stainless steel.
INTERIOR SURFACES
To clean interior surfaces and removable parts, wash with
a mild solution of soap and lukewarm water with a little
baking soda. Do not use vinegar. Rinse and dry thor-
oughly. Avoid getting water on lights, controls and the
solid cherrywood facing on the shelves.
Do not use abrasive cleaners or cloths on any interior or
exterior surfaces, including the glass door panel.
GLASS DOOR
The glass door panel can be cleaned using any standard
glass cleaner available on the market today.
Before cleaning the unit, shut off power to the unit by
turning the control knob to OFF.
7
subzero.com

Advertisement

loading