Medline MDS3003 Quick Start Manual

CUFF PLACEMENT AND
BODY POSITION
• Place cuff around a bare wrist
1-2 centimeters above the
wrist joint, on the palm side of
the wrist.
• The cuff should be snug but
comfortable.
• Sit upright and place arm with
cuffed wrist in front of your
body on a flat surface with
palm up. If the cuff is correctly
placed, you can read the LCD
display.
• Place arm on monitor's plastic
case (as shown) to help
maintain a correct and still
arm position that is level with
the heart.
Press START to turn the
monitor on. Blood pressure
measurement will begin
automatically after several
seconds. To turn off the monitor
when measurement is complete,
press START again or wait 1
minute for automatic shutoff.
GETTING STARTED
Setting Date and Time
1. Make sure that the unit is powered off
2. Press and hold the START and MEM buttons
simultaneously until a beep is heard, then release.
3. The month digit will begin to flash. Press the
MEM button repeatedly until the desired month is
displayed.
4. Then press the START button to set the correct day.
The day value will begin to flash. Press the MEM
button repeatedly until the correct day is displayed.
5. Press the START button to now set the time. The
hour value will begin to flash. Repeatedly press
the MEM button until the correct hour has been
selected.
6. Then press the START button. The minute value will
begin to flash. Press the MEM button repeatedly
until the desired minute has been selected.
7. Press the START button to exit the date and time
setting adjustment.
IMPORTANT!
You can stop the inflation or deflation of the cuff at any time by
pressing the START button.
Please read the Manual for this monitor prior to using. If you have any
questions or are experiencing difficulties, please call the Medline Service
Center at 1-800-MEDLINE (1-800-633-5463). RH18AXA
TIPS FOR TAKING YOUR BLOOD PRESSURE
The right size cuff should not
1.
feel too loose or tight. Place cuff
on bare wrist making sure it is
positioned palm side up and at
heart level.
2. Secure the cuff snugly with hook
& loop closures, allowing room for
no more than two fingers.
3. Sit quietly for five minutes before
testing. Support the back
and let feet rest on floor, keeping
legs uncrossed.
4. Keep the arm and body still
and avoid talking during the
measurement process.
5. Keep the wrist being tested
elevated at heart level. Let your
other arm relax in a comfortable
position.