Any use out of lawn is to avoid. able to stop the machine quickly. ETESIA has a policy of continuously improving the quality of its • Before mowing, always clear the lawn of stones, pieces of wood or...
Page 4
ETESIA. lights or any other device liable to produce sparks. • Any modification not authorized by ETESIA could render the • Always fill the fuel tank in the open. Always fill in the fuel tank machine dangerous and lead to serious injury during use.
2• KEY TO DIAGRAMS - SAFETY This symbol appears in the instruction manual alongside Exhaust fumes are very toxic and contain carbon monoxide those sections which deal with user safety. who is a deadly and odorless poison. This symbol appears in the instruction manual alongside important information on how to prolong the life of your Do not run the engine in confined areas.
Page 6
2• KEY TO DIAGRAMS - USE MOTOR STARTING AND STOPPING CONTROL 1- STARTING 1- Press the safety lever against the handlebars. 2- Pull on the starter handle. 2- STOPPING - Release the safety lever. DRIVE CONTROL (NBCT) - To move forward, push the control lever against the handlebar. - To stop, release the control lever.
6• PREPARATION AND GETTING STARTED THE HANDLEBAR Petrol is highly flammable. Do not smoke while filling with • Unfold the handlebar, ensuring the remote control cables are petrol. correctly positioned (see picture 1). • Tighten the 2 wing-nuts of the intermediate handlebar fastening Never add oil to the petrol.
Page 14
7• OPERATING INSTRUCTIONS MOWING EMPTYING THE GRASSBOX Wear strong shoes and trousers. Remove all objects such Always perform this operation with the motor turned off. as stones, wood, iron, string, bones, plastic, etc... from the lawn. • Raise the deflector and take the grassbox by its handle. This operation Never put your hand or foot under the mower while the can be done either from any side of the mower.
If you notice abnormalities in operation, have the safety system While the control lever is not being used, the spring should not exert checked by a service engineer approved by ETESIA. any tension on the cable. MAINTENANCE OF THE CUTTING SYSTEM...
• Remove the spark plug and pour about 15 ml of engine oil into the cylinder. Pull gently on the starter until you feel a compression : the ETESIA dealer if you wish. He will check that your mower is in valves are then closed and protected against corrosion.
The following table describes simple methods of determining a few malfunctions and correcting them. If the problem persists, we recommend that you contact one of our approved ETESIA dealers (list on request to ETESIA - 67165 WISSEMBOURG Cedex - France).
11• REGULAR MAINTENANCE SUMMARY TABLE Remove the plug lead before carrying out any work under the cutting deck. ITEM BEFORE EVERY 25 EVERY 50 PERIODICALLY COMMENTS EVERY CUT HOURS HOURS Check level Oil change * Essential for the warranty Spark plug Clean or adjust Replace every 100 hours Air filter...
• Should ETESIA discover that the machine is not used in the use belts, clutch’s, batteries, battery electrolytes, control cables, sheath, initially declared, ETESIA allows itself to cancel the warranty.
Page 20
13, rue de l’Industrie, 67165 WISSEMBOURG CEDEX declare under our responsibility that the petrol lawnmower, type NBCS - NBCT to which this declaration refers, fulfil all the relevant terms of directive 2006/42/EC applicable to them as well as to the provisions of all other applicable European directives :...
Page 21
Stamp here please ETESIA SERVICE GARANTIE 13 rue de l'Industrie 67165 WISSEMBOURG CEDEX France...
Page 22
This card has to be returned completed to ETESIA upon the first setting up. MODELL: SERIAL NUMBER: WARRANTY CERTIFICATE USER NAME ___________________________ Forename _________________________ Street ___________________________ Zip code __________________________ Town __________________________ Country____________________________ Tel ______________________________ Date of purchas _____ _____ 20 ___ Tel.