Linking With A Phone; Getting Ready; Auto Time Adjustment - Casio 5658 Operation Manual

Linking with a Phone

While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch's current time setting is adjusted
automatically. You can also change the
watch's other settings.
Note
This function is available only while
●
EDIFICE Connected is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y

Getting Ready

To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the app on your phone.
●
A
In Google Play or the App Store, search for the
CASIO "EDIFICE Connected" app and install
it on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Pair the watch with a phone.
● C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "EDIFICE Connected" icon.
Watch Operation Guide 5658
3. Y
Perform the operation shown on the
screen of the phone to be paired with.
If your phone is already paired with a
●
watch, tap
connecting with a new watch, and then
tap this watch's name.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
If pairing fails for some reason, [ERR]
●
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode. Perform the pairing
procedure again from the beginning.
Pairing started.
, tap the item for
Pairing complete.

Auto Time Adjustment

Your watch will connect with a phone at preset
times each day and adjust its time settings
automatically.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While EDIFICE Connected is not
ー
running on the phone
Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, adjust the hand
positions.
Adjusting Hand Alignment
l
If there is a World Time City specified
●
with EDIFICE Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
10