World Time; Using Edifice Connected To Configure World Time City Settings; Checking World Time; World Time City Setting - Casio 5658 Operation Manual

World Time

World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Coordinated Universal Time).
Using EDIFICE Connected to
Configure World Time City
Settings
If the watch is paired with a phone, you can
also use EDIFICE Connected to set the World
Time city.
Configuring World Time Settings
l
Note
World Time cities that can be selected
●
only by using EDIFICE Connected
cannot be selected using watch
operations.

Checking World Time

1.
Enter the World Time Mode.
Navigating Between Modes
l
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
You can display the World Time City
●
while in the World Time Mode by
pressing (A).
World Time
World Time City
Watch Operation Guide 5658

World Time City Setting

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Use (D) to display the city you want.
3.
To change the summer time setting, hold
down (A) for at least two seconds.
Release the button when the current
summer time setting starts to flash.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
4.
Use (D) to change the summer time
setting.
Each press of (D) cycles through settings
in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
5.
Press (A) to exit the setting screen.
Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
If you select a World Time City with
●
EDIFICE Connected and then change
to a different city with a watch
operation, the EDIFICE Connected
city information is deleted from the
watch.
Configuring World Time Settings
l
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
Before swapping After swapping
Home Time World Time
World Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Home Time
17