Table of Contents
Advertisement
When performing operation of multiple monitors with the
remote control unit, first set the remote control unit to the
appropriate remote control mode (see page 21).
2
5
7
8
TIPS
• You can perform operation of the monitor with the rear
buttons. Utilize the buttons belonging to the monitor that
you would like to operate.
• Operation by using the buttons on the rear side of the
product will perform the same functions.
Rear side buttons
Remote control
unit buttons
This manual assumes that this product will be used with
the remote control unit buttons, except where specifically
noted.
18
E
Basic Operation
1. INPUT (Input mode selection)
The menu is displayed. Press
mode, and press
PC D-SUB
1
PC HDMI
AV HDMI
AV COMPONENT PC D-sub input terminal
3
AV VIDEO
4
When the PN-ZB02 (optional) is attached
PC DVI-D
PC HDMI
PC D-SUB
PC RGB
AV DVI-D
6
AV HDMI
AV COMPONENT
AV S-VIDEO
AV VIDEO
*1 Select the terminal to be used in D-SUB of INPUT
*2 Select the terminal to be used in HDMI of INPUT SELECT.
*3 Select the terminal for AUDIO SELECT which is used for
*4 Select the terminal to be used in DVI of INPUT SELECT.
*5 Select the terminal to be used in BNC of INPUT SELECT.
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
If using the monitor buttons, either hold both
same time or select MUTE AUDIO from the OPTION menu.
3. MENU
Displays and turns off the menu screen (see page 22).
4. VOL +/- (Volume adjustment)
Pressing
menu screen is not displayed.
Press
* If you do not press any buttons for about 4 seconds, the
to enter.
Input mode
Video
PC D-sub input terminal
PC/AV HDMI input terminal
PC/AV HDMI input terminal
PC D-sub input terminal
Input mode
Video
PC/AV DVI-D input terminal
PC/AV HDMI input terminal
PC D-sub input terminal
PC RGB input terminals
PC/AV DVI-D input terminal
PC/AV HDMI input terminal
AV COMPONENT input terminals
PC D-sub input terminal
AV S-video input terminal
AV video input terminal
PC D-sub input terminal
SELECT. (See page 26.)
(See page 26.)
audio input. (See page 26.)
(See page 26.)
(See page 26.)
or
displays the VOLUME menu when the
V O L U M E
15
or
to adjust the volume of the sound.
VOLUME menu automatically disappears.
or
to select the input
Audio
*1
Audio input terminal
*2
*3
*2
*1
Audio input terminal
*1
Audio
*4
*2
*1
*5
*4
*2
*3
*5
*1
*1
and
at the
Advertisement
Table of Contents
