Sharp PN-V602A Operation Manual page 25

BAUD RATE
Selects the communication speed used for RS-232C
communication.
LAN SETUP
Configures the settings to control the monitor from the
computer via LAN. (See page 45.)
AUTO ASSIGN FIXED IP ADDR.
Can be enabled when RS-232C/LAN SELECT is LAN and
the DHCP CLIENT is OFF.
Set the DHCP CLIENT for secondary monitors connected
by RS-232C to OFF and a fixed IP address is automatically
allocated.
If the IP address is a duplicate with a network device other
than a monitor, individually change the IP address.
OPTION DC OUT SETTING
Normally, leave this setting as OFF.
When using an optional part, if instruction appears, change
the setting accordingly.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted
automatically according to the screen size control signal
included in the video signal input from the AV HDMI input
terminal.
BRIGHTNESS SENSOR
(When connected to the PN-ZR01 (optional) only)
When set to ON or ON: DISPLAY, the brightness will
automatically change according to the lighting and
surrounding brightness. Performs operation with the primary
monitor. If set to ON: DISPLAY, the effect will be displayed
with a .
If connecting to multiple monitors, the brightness of all the
monitors will change.
The will be displayed on the primary only.
When setting BRIGHT in SCHEDULE on the OPTION menu,
set BRIGHTNESS SENSOR to OFF.
BRIGHTNESS SENSOR SETTING
(When connected to the PN-ZR01 (optional) only)
Performs adjustments to the brightness sensor. Performs
operation with the primary monitor.
Set the surrounding brightness and the current screen
luminance to AMBIENT BRIGHTNESS and SCREEN
BRIGHTNESS.
Individually set WHEN LIGHT: and WHEN DARK:.
Even if brighter or darker than the set AMBIENT
BRIGHTNESS, the screen brightness will not change.
CURRENT AMBIENT BRIGHTNESS is shown for reference.
COPY SETTING VALUE
When the monitor has been connected to multiple monitors
with RS-232C, you can copy the primary setting details to
the secondary. Perform operations with the primary monitor.
Selects the settings to copy with COPY SETTING VALUE
TARGET.
"PICTURE" ONLY ... Copies the PICTURE menu settings.*
ALL ........................ Copies all the settings.*
Select the ID No. of the monitor that you would like copy to
with COPY TO ID No., then select COPY and press
If you select ALL, settings will be copied to all monitors.
When you would like to confirm the ID No. that is set to the
monitor, select ID No. and press
displayed on the screen.
* C ertain setting details such as ANALOG GAIN, ANALOG
OFFSET, and DISPLAY COLOR PATTERN cannot be
copied.
LOGO SCREEN
Sets whether or not to display the logo screen.
Menu Items
MENU
.
. The ID No. will be
25
E