Lcd Screen; Using The Lcd Screen; Power Saving Function - Epson Stylus CX8300 Series Operation Manual

LCD screen

Note:
The LCD screen may contain a few small bright
or dark spots, and because of its features it may
have an uneven brightness. These are normal
and do not indicate that it is damaged in any
way.

Using the LCD screen

Follow the instructions below to select and
change the setting menus and the photos on
the LCD screen.
a
b,d,e
Use Copies + or - to set the number of
a
copies for the selected photo.
b Press l or r to select the setting item.
c Press u or d to select the menu item.
The highlighted part moves up or down.
d
e
Adjusting the angle of the LCD
screen
You can change the angle of the LCD screen.
a
b
Adjusting the brightness of the
LCD screen
You can adjust the brightness of the LCD
screen.
1. Press F [Setup] to enter the setup mode.
2. Press l or r to select Maintenance,
c,d
3. Press u or d to select LCD Brightness,
c
d
c
a
4. Press u or d to adjust the brightness of

Power saving function

e
After 13 minutes of inactivity, the screen
turns black to save energy.
Press any button (except P On) to return
the screen to its previous state.
Press r to open the setting item list.
Press u or d to select the setting item
and then press OK.
Press l or r to change the displayed
photo on the LCD screen.
then press OK.
then press OK. You see the following
screen.
the screen, then press OK.
Control Panel Functions
5