Table of Contents
Advertisement
2 Install drives:
• For 3.5" drives: Place the drive in the drive tray. Turn the tray upside
down and tighten screws into the four spots indicated below to secure the
drive.
• For 2.5" drives: Place the drive in the drive tray. Turn the tray upside
down and tighten screws into the four spots indicated below to secure the
drive.
3 Insert the loaded drive tray into the empty drive bay.
Note:
1. Make sure the tray is pushed in all the way. Otherwise, the drive might not be
able to function properly.
2. The HA cluster with RackStation RC18015xs+ requires at least three drives in
the expansion unit(s) to operate normally.
10 Chapter 2: Hardware Setup
Advertisement
Table of Contents
