Kenwood HM-535 Instruction Manual page 42

4
Select the broadcast station (only w hen
TUNER is selected above).
(1) Select the preset station No.
(2) Set it.
÷ When the timer setting is completed by pressing
the set/ demo key, " COM PLETE " is displayed.
To check or modify the reservation contents, restart the timer reservation from the beginning.
7
Put the unit in standby mode.
or
42 EN
4
Select the broadcast station (only w hen
TUNER is selected above).
(1) Select the preset station No.
(2) Set it.
÷ When the timer setting is completed by pressing
the set/ demo key, " COM PLETE " is displayed.
÷ When the unit enters the Standby mode, the standby/
timer indicator lights in green.
÷ If there is a pow er failure or the pow er cord is un-
plugged after the timer reservation has been activated,
the standby/ timer indicator blinks in green. In this
case, the clock setting should be restarted from the be-
ginning.
Timer operation