Related Documentation - Epson Stylus CX4400 Series Product Information

Epson stylus cx4400: product information

Hide thumbs Also See for Stylus CX4400 Series:

Quick manual (36 pages)

Start here manual (8 pages)

Start here (4 pages)

Table Of Contents

Table of Contents

You see the following:

5. Check the alignment pattern that prints and compare it to

the alignment criteria on your screen.

6. Enter the number of the best pattern and click

If no patterns are aligned, choose the square with the

thinnest bands and click

alignment sheet and repeat this step.

7. Follow the on-screen instructions to print and compare

each alignment sheet, or click

Transporting the CX4400 Series

If you need to ship your CX4400 Series, you must prepare it

for transportation by packing it in its original box or one of a

similar size.

1. Turn off the CX4400 Series.

2. Unplug and disconnect all the connected cables.

3. Remove all paper.

4. Close the paper support and output tray.

5. Lift up the scanner and make sure the ink cartridge holder is

in the home position all the way on the right.

Caution:

Be sure to remove the tape after installing the printer in its new

location, but before you turn it on.

Then print another

Realignment.

Skip

6. Release the scanner support and close the scanner.

7. Repack the CX4400 Series in the original box or one of a

similar size using protective material to keep it from moving

inside the box.

Keep the CX4400 Series level as you transport it.

After transporting the CX4400 Series, remove the tape

securing the print head, plug in the CX4400 Series, and turn

it on. If you notice a decline in print quality, clean the print

head (see page 7); if output is misaligned, align the print head

(see page 10).