Advertisement
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and Wrench.
Step 1: open frame (A) as shown on the picture.
Step 3: lock the pin as shown on the picture.
C1
B
C1
Step 2: put the leg (B) to the frame (A) as shown on the picture.
Then use the Allen Bolt (C1) to tighten the leg (B) with the Allen
Key (C3) and the wrench (C4) . After that use the screw (C2)
and tighten it from the inside with a screwdriver.
Step 4: lock the leg as shown on the picture.
B
C2
C1
Advertisement
