Faxing Problems; Print Quality Problems - Epson Artisan 835 Quick Manual

Faxing Problems

■
Make sure the recipient's fax machine is turned on and working.
■
Make sure the
Verify that the telephone wall jack works by connecting a phone to it.
■
If the line has static, press
Fax Settings
(Error Correction Mode) settings.
■
If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the necessary
filter.
■
If fax calls are disconnected when you hang up, make sure your phone or
answering machine is connected to the
■
If an answering machine is connected, set the number of rings to answer for
receiving faxes to be greater than the number of rings for the answering
machine.

Print Quality Problems

■
For the best print quality, use Epson papers (see page 11) and genuine Epson
ink cartridges (see page 36).
■
If you notice light or dark bands across your printouts or they are too faint,
run a nozzle check (see page 33) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See
the online User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge status (see
page 35) and replace cartridges, if necessary (see page 37).
■
If you're copying, place the document flat against the scanner glass.
■
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if
necessary. Do not spray glass cleaner directly on the glass.
port on the product is connected to a telephone wall jack.
LINE
Home
, and then
Communication
and select , then select
Setup
. Turn off the
port.
EXT.
Problems and Solutions
and
V.34 ECM
53