Table of Contents
Advertisement
Chapter 9 Network Connection — Network connection
Network connection
The camera can be connected to a network via a wireless LAN or wired LAN.
For details on wireless modules that can be connected, refer to the support desk at the following website:
https://pro-av.panasonic.net/
Attach the wireless module (optional) to the <USB2.0 HOST> terminal to use a wireless LAN.
Connect a LAN cable to the <LAN> terminal on the rear side to use wired LAN.
IEEE802.11a/g/n/ac
1000BASE-T/100BASE-TX/10BASE-T
@
NOTE
t For the cable to be connected to the <LAN> terminal, use Category 6 or higher LAN cable.
Available functions
When the camera is connected to a network, the following functions are available.
f Connecting to CX ROP application
f Streaming function
f NDI|HX function
f P2 Cast link
– 175 –
Advertisement
Table of Contents
