Table of Contents
Advertisement
The items that can be set are as follows.
f [−50]...[50]
[AUDIO] menu
Sets the input/output function of audio.
[INPUT SETTINGS]
[INPUT1 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 1> terminal. Enabled when the external microphone is connected and
the <INPUT1> switch is set to <MIC> or <+48V>.
The items that can be set are as follows.
f [−40dB], [−50dB], [−60dB]
(Factory setting: [−50dB])
[INPUT2 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT 2> terminal. Enabled when the external microphone is connected and
the <INPUT2> switch is set to <MIC> or <+48V>.
The items that can be set are as follows.
f [−40dB], [−50dB], [−60dB]
(Factory setting: [−50dB])
[INPUT1 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 1> terminal. Enabled when the audio device is connected and the
<INPUT1> switch is set to <LINE>.
The items that can be set are as follows.
f [4dB], [0dB]
(Factory setting: [0dB])
[INPUT2 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT 2> terminal. Enabled when the audio device is connected and the
<INPUT2> switch is set to <LINE>.
The items that can be set are as follows.
f [4dB], [0dB]
(Factory setting: [0dB])
[REC CH SETTINGS]
[CH1 LEVEL]
Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH2 LEVEL]
Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH3 LEVEL]
Sets if the recording level adjustment method for audio channel 3 is to be automatic or manual.
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH4 LEVEL]
Sets if the recording level adjustment method for audio channel 4 is to be automatic or manual.
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH3 LEVEL CONTROL]
The recording level can be manually adjusted when [CH3 LEVEL] adjusting the recording level of the audio channel 3 is set to [MANUAL].
The items that can be set are as follows.
f [0]...[100]
(Factory setting: [70])
Chapter 4 Operation — Menu settings
– 79 –
Advertisement
Table of Contents
