Table of Contents
Advertisement
No
26
Zoom
27
System resolution/system frequency
28
Recording format
29
Clip name
30
Recommended ND filter
31
Message display area
32
Level gauge
33
Error display of auto white balance
34
Error display of auto black balance
35
Remote control status in an IP connection
36
Multi manual function
37
Color temperature
38
Optical image stabilizer function
39
Scene file name
40
Area mode function/auto focus area width
adjustment function
41
Waveform monitor
42
IR recording
43
Digital zoom
44
Focus
45
Audio monitor volume adjustment
*1
This is not displayed in the status where
*2
Displays when the remaining recording capacity of the memory card or remaining battery level gets low.
*3
The display position differs in the playback screen. Refer to Screen display during playback (page 164).
*4
Displays when the multidial, <=/&> button, <(> button, or <SET> button is pressed. The display is cleared approximately three seconds after the operation.
Mode check display
The camera settings and status can be displayed on the viewfinder or LCD monitor screen for check.
Press the <DISP/MODE CHK> button for one second or more while displaying the camera image screen to display the STATUS screen of the mode
check.
The display toggles in the order of the STATUS screen, FUNCTION screen, AUDIO screen, SWITCH screen, NETWORK screen and the camera image
screen each time the <DISP/MODE CHK> button is pressed.
Each screen of the mode check is displayed for approximately five seconds.
The screen does not switch while the <DISP/MODE CHK> button is pressed.
Press the <EXIT> button while each screen is displayed to return to the camera image screen.
FUNCTION screen
Displays the video output settings and information of the recording media.
[VIDEO OUT]
Chapter 7 Output and Screen Display — Screen status display
Camera image
Item
/
is not displayed.
Item
[VIDEO OUT SEL]
[SDI OUT FORMAT]/[AV OUT
FORMAT]
[SDI OUT CHAR]/[AV OUT CHAR]
[HDMI OUT FORMAT]
[HDMI OUT CHAR]
When the <DISP/
MODE CHK> button
screen
is pressed
—
l
—
l
—
l
l
—
l
l
l
l
l
l
—
—
—
—
—
—
—*
l
4
—
l
—
l
—
l
—
l
l
l
—
l
—
l
—
l
l
l
Displays the output destination of the video and audio with [SDI + HDMI]/[AV +
HDMI].
Displays as follows depending on the setting for the output destination of video
and audio.
f When set to [SDI + HDMI]:
The signal output from the <SDI OUT> terminal is displayed with
[1920×1080p][1920×1080i]/[1920×1080PsF]/[1280×720p]/[720×480i]/
[720×576i].
f When set to [AV + HDMI]:
The signal output from the <AV OUT> terminal is displayed with [720×480i]/
[720×576i].
Displays as follows depending on the setting for the output destination of video
and audio.
f When set to [SDI + HDMI]:
Displays whether to superimpose the character to the output from the <SDI
OUT> terminal with [ON]/[OFF].
f When set to [AV + HDMI]:
Displays whether to superimpose the character to the output from the <AV
OUT> terminal with [ON]/[OFF].
The signal output from the <HDMI> terminal is displayed with [3840×2160p]/
[3840×2160p(420/8bit)]/[1920×1080p]/[1920×1080i]/[1280×720p]/[720×480p]/
[720×576p].
Displays whether to superimpose the character to the output from the <HDMI>
terminal with [ON]/[OFF].
– 166 –
STATUS
Playback screen
—
l
—
l
—
l
l
l*
—
l
l
—
l
—
l
l
—
—
l
—
l
—
l
—
l
—
l
—
l
—
—
—
l
—
l
—
l
l
Description
3
l
l
Advertisement
Table of Contents
