Table of Contents
Advertisement
Item
[SPOTLIGHT]
[BACKLIGHT]
[A.IRIS LEVEL]
[IRIS]
[Y GET]
[FOCUS MACRO]
[O.I.S.]
[i.ZOOM]
[D.ZOOM]
[IR REC]
[FAST ZOOM]
[PRE REC]
[VFR]
[SUPER SLOW]
[REC CHECK]
[BACKGR PAUSE]
[DEL LAST CLIP]
[SLOT SEL]
[EXPAND]
[PEAKING]
[WFM]
[ZEBRA]
[LEVEL GAUGE]
[LEVEL GAUGE SET]
[LCD/VF HDR]
[VF ON/OFF]
[LCD/VF DETAIL]
[AUDIO MON SEL]
[MENU]
[LOAD SETUP FILE]
[LCD BACKLIGHT]
[CARD READER MODE]
[STREAMING START]
@
NOTE
t Following functions will be disabled when the camera is set to < h > (standby) and then turned on again.
[FBC], [S.GAIN], [AREA], [AF AREA], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [Y GET], [D.ZOOM], [FAST ZOOM], [EXPAND], [PEAKING],
[WFM], [VF ON/OFF], [AUDIO MON SEL], [CARD READER MODE], [STREAMING START]
Checking the function assigned to the USER buttons
You can check the function assigned to the USER buttons in the SWITCH screen of the mode check. For details, refer to "Mode check display"
(page 166).
Chapter 3 Preparation — Assigning function to the USER buttons
Enables/disables the auto iris control function for the spot light.
Enables/disables the auto iris control function for the backlight compensation.
Enables/disables the auto iris level function.
Assigns the function that switches the auto iris and manual iris.
Assigns the function that displays the luminance level of the frame area displayed near the center.
Switches the focus macro setting.
Enables/disables the optical image stabilizer function.
Assigns the zoom function to minimize image distortion.
Enables/disables the digital zoom. Zooms in on the field angle by 2x, 5x, and 10x vertically and horizontally
each time the USER button is pressed or the USER button icon is touched.
Enables/disables the IR recording.
Speeds up the zoom speed when the zoom lever is pushed in all the way.
Enables/disables the pre-recording.
Enables/disables the variable frame rate recording function.
Enables/disables the super slow recording function.
Automatically plays back the last approximately three seconds of the previously shot clip.
Assigns the function that stops the background recording of card slot 2.
Press and hold the USER button to which [BACKGR PAUSE] is assigned for approximately five seconds
or touch and hold the USER button icon for approximately five seconds and release to stop background
recording.
Deletes the clip last shot.
Selects the card slot with the memory card for recording inserted.
Or, switches the card slot for the clip to display in the thumbnail screen.
Enables/disables the enlarged display function (focus assist function).
Enables/disables the peaking display (focus assist function).
Switches the display of the waveform monitor. The waveform display is selected in the [VIDEO OUT/LCD/
VF] menu → [EI ASSIST] → [WFM MODE].
Displays/hides zebra patterns.
Displays/hides the level gauge.
Sets the current horizontal and vertical direction as the reference value of the level gauge.
Toggles output images from the LCD monitor between the high dynamic range and standard dynamic
range.
Forces images to be displayed in the viewfinder.
Adjusts the intensity for the contour of the video in the viewfinder or LCD monitor to make it easier to
focus.
Switches the audio channel 1/2 and the audio channel 3/4 for the output audio (headphone terminal, built-
in speaker, <AV OUT> terminal) while the USER button is pressed or the USER button icon is touched.
Also, the display of the audio level meter is switched between the audio channel 1/2 and the audio channel
3/4.
Switches display/hide of the menu.
Selects the setup file saved on the memory card to load on the camera.
Switches the brightness of the LCD monitor. Toggles [0], [1], [2], and [−1] in order each time the USER
button is pressed or the USER button icon is touched.
Enables/disables the card reader mode function (USB mass storage function).
f Release the connection to enable the card reader mode when connected to a network via a wireless
LAN. (The camera returns to the original setting when the card reader mode is disabled.)
Starts/stops streaming from the camera.
Streaming starts only during RTMP streaming.
Description
– 53 –
Advertisement
Table of Contents
