Toshiba RAV-RM301MUT-E Service Manual page 101

No. Part name
1. Detachment
TA sensor
1) Remove the panel, electric parts box cover, wiring
cover and wiring fixing plate.
(Refer to
2) Disconnect TA sensor connector (CN104 Yellow, 2P)
which is connected to the control P.C. board, and take
off the lead wire from the clamp.
3) Remove the screw of the TA sensor cover.
(Ø4 × 10, 1pc.)
4) Remove TA sensor from the TA sensor fixed
implement.
2. Attachment
1) Fix TA sensor to TA sensor fixing implement, and fix
the TA sensor cover with screw.
(Ø4 × 10, 1 pcs, Ø4 × 8, 1 pcs.)
2) Perform wiring of TA sensor as original.
Procedure
-1, -1, -1-2, -1-3.)
– 101 –
Remarks
Adjust position of the tube so that the tube of
TA sensor will be included in the cover.
TA sensor
fixing bracket
TA sensor
Groove for wiring
Wiring fixing plate
of the drain pan
Fixing screw Fixing screw
(Ø4 × 8) (Ø4 × 10)
Fixing screw
TA sensor cover