Clean; How To Clean The Cleaning Brush - BAT glo HYPER+ User Instructions

51
08

Clean

Ensure the glo™ tobacco heater has been allowed to cool
for a minimum of 5 minutes before cleaning.
Open the cleaning door at the bottom of the glo™ tobacco
EN
heater. Use a tissue to wipe away any collected moisture from
the bottom of the device and cleaning door.
For best performance, moisture at the cleaning door and
bottom of the glo™ tobacco heater needs to be removed after
every 5 sessions.
After x5
sessions
To clean the inside of the heating chamber, open the slider
door at the top and the cleaning door at the bottom of the
glo™ tobacco heater.
Clean the heating chamber using the brush provided. For best
results, clean from both ends as required.
For best performance, the glo™ tobacco heater cleaning
chamber needs to be cleaned after 20 sessions.
1 2
09

How to clean the cleaning brush

Simply rinse brush under running water. Please make sure
that the cleaning brush is dried when using again with glo™
tobacco heater.
52
EN